The failure and damage of hydraulic system are mostly caused by pollution, insufficient maintenance and improper selection of oil. In order to ensure the hydraulic system in a good performance state, and long its service life, it is reasonable to use, parker F11 series hydraulic motor accessories and pay attention to its daily inspection and maintenance. General matters needing attention rolimite reminds customers of the following matters needing attention in the use of hydraulic station:

1, low temperature, oil temperature, with up to 20 ℃ above permission to order actions; When the oil temperature above 60 ℃ the performance of the system should be paid attention to.2, stop more than 4h of equipment, should first make the hydraulic pump no-load operation for 5min, then start the actuator work.3. Do not arbitrarily adjust the interlocking device of the electrical control device system, and move the positions of limit switches, block blocks and stroke bump blocks at will.4, all kinds of hydraulic yuan, auxiliary parts without the approval of the competent authorities, do not arbitrarily move, the field plunger pump accessories should be notified to the relevant departments to analyze the reasons and eliminate. In addition to the above points, in accordance with the relevant provisions should also do a good job on the types of hydraulic spare parts and hydraulic oil management.